NoisKen ESS-2000AX静电放电发生器器
型 号:ESS-2000/TC-815P(选购件)
品 牌:日本 NoisKen
ESS-2000在接触和空气放电模式下均产生30kV的放电脉冲。它满足IEC61000-4-2标准,主机有一块5英寸的LCD显示屏、数字输入键、一个很轻的放电枪和GP-IB接口。配合多种电容和电阻放电单元,可方便地在枪内更换,可编程操作提供了四种试验模式。
图中放电支架是可选件
输出电压:0.2kV~30kV
极性:正或负
上升沿:0.7~1ns
放电模式:接触放电或气隙放电
放电电容:150pF
放电电阻:330Ω
操作模式:手动、IEC(预置4个试验等级)、扫描(自动电压渐升)及程序控制
有各种选件可供选择:温度和湿度传感器、自动静电消除器等
更换电阻和电容后可满足各种汽车电器的静电试验
GENERAL
The ESS-2000AX ESD Simulator generates highly consistent, repeatable ESD pulses up to 30kV in both contact and air discharge modes. Compliant with IEC61000-4-2 standard, the unit features a 5.7-inch display, a lightweight gun and optic serial interface.
A variety of capacitor and resistor units are available and are easily changeable within the gun. The fully- programmable, menu-driven simulator offers three trigger modes.
FEATURES
Fully programmable menu-driven simulator providing three operation modes: IEC standard, Manual and Sequence
A 5.7-inch color LCD for easy setting and good visibility
Unique shape for the operator's easy access to the control and displays even when the unit is put on the floor level (ground plane)
Communications with PC through the optic serial interface
A wide variety of the dedicated options
SPECIFICATIONS
|
Output polarity | Positive or negative |
Output voltage | 0.20kV~30.0kV ±5% (30.5kV max) 0.20kV~10.0kV: 0.01V step, 10.0kV~30.0kV:0.1V step |
Discharge interval | Normal mode: 0.05s~600.0s ±10% Extra mode : 1.00s~600.0s ±10% 0.05s~9.99s: 0.01s step, 10s~600.0s: 0.1s step |
No. of times of discharge | 1~60,000 times preset on the counter or continuous |
Discharge mode | Air/contact discharge |
Radiation level | Normal/Extra mode |
Trigger mode | Gun trigger/main unit trigger/ external trigger |
Operation mode | IEC standard | Contact discharge: 2.0kV, 4.0kV, 6.0kV, 8.0kV (4 voltages preset) Air discharge: 2.0kV, 4.0kV, 8.0kV, 15.0kV (4 voltages preset) |
Manual | Contact/Air discharge: 0.20kV~30.0kV Sweep (automatic voltage ramping) available Up to 99 units (test settings) storable |
Sequence | Seamless run of the selected test sequence (made of any combination of 99 units in Manual mode) No. of units per one test sequence: up to 30 units No. of test sequences: up to 20 |
Warning lamp | Lights up while the HV circuitry is on Blinks while discharges are in progress |
Discharge gun | TC-815R |
Charging resistance | 10M ohm(53 M ohm for combination with TC-815R discharge gun) |
AUX connector | D-SUB15 pin, female connector Warning lamp (optional) connection Automatic ESD Eliminator (optional) connection External interlock input External trigger input |
Optical communication connector | Optic RS-232C for PC communication |
Power supply | 100~240V AC 50/60 Hz ±10% |
Power consumption | 75VA |
Operating temperature and humidity | +15~+35ºC, 25~75% (no condensation) |
Character display | English, Chinese, Korean, Japanese |
Dimensions and weight | 260 (W) X 230 (H) X 285 (D) mm (projection excluded) |